When air contacts with water , water absords thermal energy from the air to evaporate. The result is the air temperature that will gone down. CeLPad amplifies and turns such a simple natural phenomenon into the most economical solution for providing optimal temperature and humidity. Made by specially-impregnated cellulose matrix. CeLpad rapidly absorbs water and provides massive contact surface between air and water. When hot and dry air passes through wet CeLPad, evaporative process takes place and the air is cooled down and humidified.
The more effective solution for evaporative cooling and humidification.
Very hot and very dry climates could have devastating
effects on productivity of livestock productivity, plants, and humans. Evaporative cooling has proven to be one of the most reliable and economical methods to maintain optimum temperature and humidity.
CeLPad ( Cooling Pad ) is what you need for your evaporative cooling system to perform effectively and economically. When hot and dry air is induced through the wet CeLPad ( Cooling Pad ) , it will be cooled down and humidified. Our long experience in designing evaporative systems ensures that CeLPad ( Cooling Pad ) can make evaporative systems simpler and more efficient for you. Do not hesitate to contact us or your local distributor for more details.
CeLPad ( Cooling Pad ) has two basic configurations
• CeLPad ( Cooling Pad ) 0760 (45/15 flute angle configuration): Designed for minimizing pressure drop from the cooling pad. Suitable for the design with high air face velocity.
• CeLPad ( Cooling Pad ) 0790 (45/45 flute angle configuration): Designed for maximizing the evaporation efficiency by creating more contact time between air and water to allow for better evaporation. Suitable for typical application with a moderate air face velocity design such as poultry, and greenhouses.
** CeLPad ( Cooling Pad ) can be easily installed using PadPlus , a complete frame system .**
The CeLPad ( Cooling Pad ) Advantages
Maximum Efficiency : CeLPad ( Cooling Pad ) is designed to provide maximum contact surface between air and water (approximately
460 m2/m3). Such massive surface enables an optimum cooling and humidification effect from evaporation.
Maximum Freshness : CeLPad ( Cooling Pad ) acts as a natural filter that purifies inlet air. Carefully designed flute angle directs water towards both the air inlet and outlet side; the water then intrinsically flushes away dust, algae, and mineral build up on
the evaporation surfaces.
Maximum Durability : CeLPad ( Cooling Pad ) is made of special cellulose paper impregnated with insoluble chemical compounds to preserve its long working life in your system.
Maximum Toughness : CeLPad ( Cooling Pad ), with proper water bleed-off and regular brushing, can be used in imperfect water and
Extreme condition requires more extreme measurement.
CeLPad ( Cooling Pad ) "Black+" is developped specially for harsh and tough
condition. Special "Black+" protective coating prevents CeLPad ( Cooling Pad )
surface from constantly exposing to extreme environment such
as dirt, sand storm, and risk of bacterial and algae growth.
"Black+" protective coating is also durable and strong enough
for frequent surface cleaning. Enhanced with special anti-friction
modifier,CeLPad ( Cooling Pad ) “Black+” is tough and can be cleaned effortlessly.
This will ensure not only its long service life even under harsh
condition, but also its optimum efficiency for a long time.
CeLPad ( Cooling Pad ) "Black+" is an ideal evaporative cooling media for gas
turbine inlet, textile factories, harsh water condition, locations
exposed to sand storm and the application where risk of algae
and bacterial growth is high. With special protective coating in
CeLPad ( Cooling Pad ) "Black+" , the surface will not allow algae or bacteria
or mineral deposits to anchor themself. They can be easily gone
when the pad dries off. The surface can also be repeatedly clean
easily without damage. Special protective coating will also improve
the life expectancy of CeLPad ( Cooling Pad ).
EVAPORATIVE COOLING SYSTEMCeLPad Dark
The more productive cooling pad
Artificial lighting is one of important factors that affect productivity in livestock productions. CeLPad Dark is designed to not only providing optimal cooling. It is also prohibiting light from entering through evaporative panel so that the natural light does not interfere with your artificial lighting program. The best part is that you can do so with less static pressure that in turn lowers electricity expenses on ventilation systems. CeLPad Dark is your first choice for productivity improvement.
2-in-1 productivity enhancement: CeLPad Dark provides optimal cooling with maximum evaporation surface. Specially designed flute geometry allows air to easily pass through but obstructs light from entering. CeLPad Dark combines the benefit of cooling and dark out in a single installation.
Easy Installation: Forget about the extra efforts to prevent light entering evaporative cooling panel. Installation of CeLPad Dark is as easy as any normal evaporative cooling panel. No extra hassles.
Low static pressure: CeLPad Dark has low static pressure that would not add burden to the ventilation systems while providing the benefit of dark out. This means extra saving in electricity running and maintenance costs along the way.
Fully customized: CeLPad Dark can be further enhanced with special features such as “Black+” special edge coating to provide optimal long usage life; and/or “Nano” active ingredient that provides extra hygiene to the evaporation surface.
Height: Any height up to 2000mm (plus 30mm water distribution pad included)
Depth: 100mm or 150mm
*custom sizes are available upon request
The more efficient Evaporative media
Special evaporative media that combines Nano active ingredient with photo-catalytic agent. The surface of CeLPad Nano-Titanium can act against several types of bacteria, germ and virus. It also promotes photo-catalytic process that helps purify the inlet air.
CeLPad Nano-Titanium Advantages (Nano technology)
- Anti Microbial
- Mold Prevention
- Anti Algae
- Virus Inactivation
High Performance CeLPad
Ideal solution for portable evaporative cooling units
CeLPad "S" is developped with performance in mind, to obtain the maximum efficiency at minimum space requirement. A 5mm flute height design delivers approximately 690 square meters of evaporation surface per 1 cubic meter of CeLPad "S".
CeLPad "S" is 4 times more efficient, therefore, consumes only 1/4 of typical CeLPad space to produce equivalent cooling efficiency.
CeLPad "S" is a perfect solution for portable evaporative cooling units. CeLPad "S" makes high efficiency portable cooling units possible.
UTI-200R8 Climate Controller
Centralized computer control, connected up to 100 houses. Thai/English control software.
•Programmable by rearing periods (T-curve) up tp 8 periods
•8 exhaust fan ports, 1 water pump port, 1 timer port (8-stage per day)
•Heat Stress Index control/alarm system
•Built-in battery back up
•Built-in memory records temperature, humidity, date, time up to 675
•Records (14-day record at half-hour interval)
•2 sets of temperature sensors (0-70 ํC, 0.1 ํC incremental)
•1 set of humidity sensor (25-99%RH, 1%RH incremental)
The more effective solution for high-end evaporative cooling and humidification.
GLasPad is made of special impregnated glass fiber material that allows for superb moisture absorptive capability, ensuring
continuous humidification and evaporative cooling effect even at a high air face velocity.
Special inorganic compound of GLasPad makes it fire resistance and incombustible. GLasPad therefore fully complies with any strict building and industrial code.
GLasPad is an ideal media for humidifying after Air Handling Units and Heater, as well as for Gas Turbine inlet pre-cooler.
GLasPad has two basic configurations
GLasPad 0760 (45/15 flute angle configuration): Designed for minimizing pressure drop from the cooling pad. Suitable for the design with high air face velocity.
GLasPad 0790 (45/45 flute angle configuration): Designed for maximizing the evaporation efficiency by creating more contact time between air and water to allow for better evaporation.
Inorganic, inflammable material (Non-Combustible according to EURO Class A2, S2, D0 " (Based on EN ISO1182 and EN 13823 (SBI) ) and class 1 filter according to UL-900 Low energy humidifier/cooler
Allow for precision control
No risk of oversaturation
No need for water treatment
Trouble free maintenance
safe and hygienic
Complete frame system for the more efficient evaporative cooling system. A perfect complementary to CeLPad.
Maximum Durability: PadPlus is made of 100% first grade PVC with anti-UV compound material to ensure its long working life even under harsh condition.
Easy Installation: PadPlus, with its light weight and snap-on components, can be easily installed. No solid technical background is required!!
Easy Maintenance: PadPlus can be easily dissembled and re-assembled for regular cleaning and maintenance.
Your worthiest investment: PadPlus is an affordable frame system that makes your evaporative system pay off quickly.